The EP Greenhouse reducer is a compact and lightweight reduction reducer with a built-in limit switch system that is ideal for assembly of a locally available electric engine. The gear driver is utilized in manually-controlled or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear motor is certainly rainproof and windproof. The gear motor includes a high protection class (IP65) and can be utilized in an ambient temperature of 0-60 °C.
The low-noise gear reducer for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmission means that the drive shaft is usually locked when the decrease geared motor is not running. The fully sealed reduction gearbox comes with an growth chamber with a diaphragm to keep the gear oil at a low pressure under all situations, even at high temperature ranges. 
Thanks to the use of an expansion chamber, the gear driver can be installed in any position. There are no limitations, because there is no dependence on a bleed connect. The sealed reduction gear driver keeps the apparatus essential oil of the gear reducer in optimum condition because of its entire operating lifetime. The reducer is ideal for discontinuous use, operating course s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction reducer has an FT85 motor assembly flange, to which a suitable IEC standard motor can simply be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed within an included chamber and is enclosed by an impact-resistant plastic material cover. The limit change system is obtainable and simple to adjust. The limit change system’s maximum switching range is usually 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The geared motor comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The geared motor for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of app of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).