Additional Features:
Made of Steel
For use with cast iron bushed bore pulley
This U1 Bushing with 5-1/2″ bore is a high-quality precision product that’s built for toughness and strength. U1 bushings are being used in an extensively wide range of applications, which includes; sprockets, shaves, pulleys, gears, plus much more, we as well offer most of these products. What sets this bushing apart may be the high-quality steel engineering along with exact manufacturing and top quality control; this means that you always get a premium quality regular product. What really models us apart from the other men is our highly trained expert staff members and our company-wide goal of customer satisfaction.
1. Be sure the tapered cone areas of the bushing and the within of the driven product are clean and free from anti-seize lubricants.
2. Place the bushing in sprocket or additional component type that accepts the bushing.
3. Place cap screws loosely in pull-up holes. The bushing remains loose 
to make sure sliding match on shaft.
4. With major on shaft, slide the sprocket or other portion type to the required placement on the shaft. Make sure you keep the heads of the cap screws available.
5. Align the sprocket or component type, tighten the screws additionally and progressively until they will be pulled up tight. Do not make use of extensions on the wrench handles and do not permit the sprocket or portion to be drawn i connection with flange of bushing. At this point there must be a gap between the bushing flange and sprocket, make sure this gap will not close.
Dual split barrel ensures concentricity
Grips the shaft with great clamp fit
High torque carrying capacity
Permits blind assembly
Load not carried or limited by mounting screws
External key of all sizes for great drive and greater torque carrying capabilities
Double-split barrel for confident clamping
Solid flange to keep concentric bores
Available in inch, metric, and spline bores. Bore range between 3/8″ to 10″
Solid Flange & Double Split Barrel – Assures better concentricity to the shaft.
Key to Key Travel – With keys about both shaft and product to provide the strongest possible travel.
3/4″ per Foot Taper on Barrel – Self locking taper supplies the highest degree of mechanical locking merchandise to product.
Taper bushing are widely used together with sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made from high quality engineered elements with superb tolerance. The feature is easy to make use of and needs no extra alteration. These bushings can fit almost all types of assemblies and sizes. They will be the best choice in design for mechanical connections.
To complete designations put bore size. For example: PD1215X16MM designates a 1215 taper bushing with a 16mm bore.
No costly re-boring: full selection of both metric and imperial readily available.
Standard range matches up to 125mm/5″ shafts & Hub diameter required depends on the application.
Complete short reach range available, for compact lightweight assemblies & Clean, Compact Design.
Simple installation and removal.
This Split Taper Bushing is designed exclusively for use with cast iron bushed bore pulleys and can be purchased on the same page as the pulley you need.
For use with 1 3/16” shaft sizes.
Includes 2 set screws.