Additional Features:
Made of Steel
For use with cast iron bushed bore pulley
This U1 Bushing with 5-1/2″ bore is a high-quality precision product that’s built for durability and strength. U1 bushings are being used in an extensively wide range of applications, which includes; sprockets, shaves, pulleys, gears, plus much more, we likewise offer all of these products. What 
models this bushing apart may be the high-quality steel engineering along with specific manufacturing and top quality control; this ensures that you always get yourself a premium quality consistent product. What really units us apart from the other folks is our experienced expert staff members and our company-wide aim of customer satisfaction.
1. Be sure the tapered cone floors of the bushing and the inside of the driven merchandise happen to be clean and free of anti-seize lubricants.
2. Place the bushing in sprocket or additional part type that accepts the bushing.
3. Place cap screws loosely in pull-up holes. The bushing continues to be loose to make sure sliding suit on shaft.
4. With essential on shaft, slide the sprocket or other portion type to the desired placement on the shaft. Make sure to leave the heads of the cap screws available.
5. Align the sprocket or part type, tighten the screws on the other hand and progressively until they will be pulled up tight. Usually do not employ extensions on the wrench handles and do not permit the sprocket or part to always be drawn i connection with flange of bushing. At this time there must be a gap between your bushing flange and sprocket, make certain this gap will not close.
Double split barrel ensures concentricity
Grips the shaft with confident clamp fit
High torque carrying capacity
Permits blind assembly
Load not carried or tied to mounting screws
External key on most sizes for positive drive and better torque carrying capabilities
Double-split barrel for positive clamping
Solid flange to keep up concentric bores
Available in “, metric, and spline bores. Bore range from 3/8″ to 10”
Solid Flange & Twice Split Barrel – Assures better concentricity to the shaft.
Key to Key Drive – With keys upon both shaft and merchandise to supply the strongest possible travel.
3/4″ per Foot Taper on Barrel – Personal Split Taper Bushing china locking taper supplies the highest degree of mechanical locking merchandise to product.
Taper bushing are widely used as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made of high quality engineered elements with great tolerance. The feature is easy to work with and needs no added alteration. These bushings can match almost all types of assemblies and sizes. They will be the best choice in style for mechanical connections.
To complete designations put bore size. For instance: PD1215X16MM designates a 1215 taper bushing with a 16mm bore.
No costly re-boring: total range of both metric and imperial readily available.
Standard range fits up to 125mm/5″ shafts & Hub diameter required depends upon the application.
Complete short reach range readily available, for compact compact assemblies & Clean, Compact Design.
Simple installation and removal.
This Split Taper Bushing is designed exclusively for use with cast iron bushed bore pulleys and will be purchased on the same page as the pulley you will need.
For use with 1 3/16” shaft sizes.
Includes 2 set screws.