Slewing bearings comprise an inner ring and an outer ring, one of which often incorporates a gear. Together with attachment holes in both bands, they enable an optimized power transmission with a straightforward and quick interconnection between adjacent machine parts. The bearing raceways, with the rolling factors and cages or spacers, are created to accommodate loads performing singly or in mixture, and in any direction.
Selecting the appropriate slewing bearing can be a challenge, especially if there happen to be stringent technical, reliability or economic demands. In these cases, for instance, EPT application engineering service can provide advanced calculations and simulations making use of state-of-the-art analyse methods to optimize and validate the very best design to fulfill the customer requirements.
EPT offers worldwide a variety of 
added value offerings for slewing bearings, including remanufacturing. A slewing bearing with simply 30% Shaft Clamp china remaining of its calculated service life can be really worth remanufacturing. EPT’s standardized remanufacturing procedures can extend considerably the service lifestyle of critical equipment.
All of these incorporate to improve rotating equipment efficiency and reduce total cost of ownership.
1. We can supply various size slewing band bearings.
2. Type: Non-teeth, interior teeth, external teeth
4. Diameter range: 200—–6500mm
5. Design and produce according to customer requirements, OEM bearing.
6. Top quality bearing, competitive cost, prompt delivery and very best services.
7. Welcome to Other customized bearings, miniature bearings, vehicle bearings, excavator and crane bearings and so on.
The slewing bearing (slewing bearing) has been coated with anti-rust oil just before leaving the factory and wrapped with film and linen. The rust-proof amount of this package is generally 3-6 several months. The storage temperature ought to be 20±10°C, and the relative humidity isn’t more than 60%. Following the expiration date, it ought to be maintained in time. The slewing bearing share ought to be filled up with grease after twelve months and check the overall flexibility of its rotation.
The slewing bearing (slewing bearing) is generally fixed in the pallet or in the package when it leaves the factory. It really is available in single-piece packaging and group packaging. Transportation and storage ought to be kept level, can’t be collided and squeezed, can’t be rained, and the storage area ought to be flat. There must be a toned separation between the stacked slewing bearings. The slewing bearing generally includes a lifting hole, which is often screwed into the eyebolt for safe lifting.
Our four point speak to ball slewing bearing is made up of two seat rings. In this slewing bearing, the balls connection with the circular raceway at four factors. The bearing can support axial power, radial push and resultant moment concurrently.
The contact ball slewing bearings are small in design and lumination in weight. They might be used in slewing conveyors, welding manipulators, middle or tiny sized cranes and excavators, etc.
A slewing bearing or slew[ing] band is a rotational rolling-element bearing or simple bearing that typically helps a heavy but slow-turning or slow-oscillating load, often a horizontal platform such as a conventional crane, a swing yarder, or the wind-facing system of a horizontal-axis windmill. (To “slew” means to turn without adjust of place.)