We are focused on research and development of products that meet up with the increasingly superior electronics industry and so are trusted in computers, kitchen appliances, consumer electronics, communications, facts, industry, medical and other fields.
We also offers patent for 360 level AC PIN interchangeable type adaptor and it is leading the world’s special design.
Ever-Power provides goods which are more compact, lighter, more vitality efficient, and better to use.
We selling products all over the world and receive the certifications for every of country. And in addition acquired ISO9001:2015 and ISO 14001:2015 etc. to make sure products meet the latest regulations.
Gear adapters mount between the vehicle transmitting and power take-off, and can serve several purposes. Mostly, adapters are used to change the direction of rotation of the PTO output shaft. They can even be applied to space the PTO out and away from the transmission case. On some imported or non-SAE normal transmissions they allow for the mounting of normal 6-bolt vitality take-offs. Gear Adapters can be found to match most popular transmissions.
Numerous body configurations: Can relocate the PTO output shaft to improve clearance for a driveshaft or direct-coupled pump
Changes PTO shaft rotation: Suits PTO rotation to that of the driven equipment
Standard and non-standard bolt patterns: Complements SAE standard PTOs to nonstandard transmissions
• Frame constructed of 1/4″, 3′ x 
3″ and 1/4″, 2″ x 2″ steel tubing
• Pto Adapter china Operates off of skid steer hydraulics
• Requires a the least 16 GPM; maximum of 22 GPM (makes 20 to 40 HP from the power take off)
• You don’t need to modify electrical power take off shafts
• Adjustable lower arms
• Reinforced heavy duty universal mounting brackets
• Complete with motor, hydraulic hoses and smooth faced couplers
• Ideal for three point electric power take off gear – snow blowers, mowers, tillers, post hole augers, etc
: Over-running clutches give a safe means to protect operators and pricey machinery from conditions when the inertia of PTO influenced apply exceeds and over-works the tractor PTO velocity. In such a case, the over-working coupler will free-wheel
smoothly and properly. Over-running clutches will normally stand up to applications requiring up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Serious shock loads or drive line angularity will reduce this capability
If the distance of your PTO does not fit properly within a tractor, a PTO adapter can extend the size without needing to replace it for a fresh one. This adapter comes with an overall length of 7-3/16″ with a man end 1-3/8″ x 6 spline and a lady 1-3/8″ x 6 spline end.
Create additional length on the finish of your PTO. This tractor PTO shaft adapter has both a female 6 spline end and a man 6 spline end, each end includes a diameter of 1-3/8 in. This enables more connection options and is well suited for anyone that owns an older tractor since the older parts may not be produced any more and so are less common.
The over-running coupler is an essential part of PTO drive on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit may be required to over-run generating source. The coupler drives solidly from tractor to put into action and free wheels easily when put into action exceeds tractor PTO speeds. All measurements are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Necessary with 1000 RPM gearcase upgrade or 3 Point Hitch system for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter is the perfect meet for your Shop Dog. It is usually easily carried in the Store Dog’s hitchpin and PTO adapter carriers.
This is also a good PTO adapter for tractor use. This adapter decreases the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It has an overall amount of 6-3/8″ and is rated for tractors up to 70 HP.