gearbox for agricultural machinery agricultural Gearbox
The agricultural gearbox is the primary mechanical component of the kinematic chain of agricultural machines. It really is normally powered by the tractor power take-off via the PTO shaft and the gearbox drives. The working torque may also be transmitted to the gearbox by hydraulic motors or belt pulleys, in addition to chain gears.
Agricultural gearboxes will have a single input shaft and at least one output shaft. If these shafts sit at 90° to each other, the gearbox 
can be an ORTHOGONAL ANGLE gearbox or even more typically called a right-position gearbox.
rotary tiller gearbox is certainly adopted middle gear transmission program, mounted with the tractor of 12-80HP. Tractor wheel tracks are totally protected after tillage as the operating width is a lot wider. The quality is reliable and the efficiency is well. So that it can be used on dried out and paddy field. It can decrease the time, laboring, and cost, etc. during operation
Increasers and Reducers
When the gearboxes have both gears with different numbers of teeth.
The gearbox is a reducer when the driving gear, i.e. the one with the input shaft, has the fewer number of teeth (pinion), therefore the result shaft rotates slower compared to the input shaft.
It is named an increaser when the input shaft is mounted on the gear with the larger number of teeth (crown), hence the result shaft rotates faster compared to the input shaft.
Right-angle gearboxes, distributors or rotational invert gearboxes
When the gearboxes have gears with the same number of tooth.
The gearbox is called right-angle when it only has two shafts (input and output),
whereas it really is called a distributor whenever there are at least two output shafts.
It is called a rotational invert gearbox and parallel offset in the versions with parallel shafts with two gearboxes.
Speed change
in addition to the primary couple of gears and relevant shafts, the gearboxes may also have various other gears with a different quantity of teeth. The apparatus shift of the primary couple of gears with the secondary types allows different speeds. The manual switch of the secondary gear pair with gears with different number of teeth allows modifications to the result rotation speed.
CMR GROUP can design and produce also agricultural machinery applications.