We – EPG Team the greatest gearbox & motors , couplings and gears factory in China with 5 different branches. For more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
Expose Method Tee Grid Ma ept Equipment
Our tee grid ma ept machine it a completely computerized line,even for punching.
For aged technological innovation,right after forming,personnel want to just take the readyprofile to do puncing independently.Now our new engineering no want to do that.It will save a great deal labor.The last item can be lower as for every set size controller,and the size is immediately measured by encoder.When last merchandise arrived at established size,device will not end to reduce the sheet immediately.
If you want to make suspended ceiling program,3 devices are required,one primary tee forming equipment,one cross tee forming machine and angle tee forming device.Our Uncovered ceiling tee grid machine ,it is composed of manual decoiler,main forming element,punching method,gathering desk.A few frequent tee grid layout,flat one,slotted a single and black out one particular.
TECHNICAL PARAMETERS
1.Flow Chart of roll forming machine:)
two.Main machine for Ceiling Tee Grid Forming Equipment
oll Forming System: (Ceiling method Metal drywall T bar Tee Grid form mild keel roll forming machine )
No : |
Roll Forming Method Main Parameter : |
|
one |
Size of the principal portion |
about 3000*1000*four hundred-8800*1500*1200 |
2 |
Fat of primary element |
3-8 tons |
three |
Wor ept Speed |
forty-45m/min |
4 |
Voltage |
380V/50HZ3Phase (as customer’s ask for) |
four |
Roller fixer |
guidebook column |
five |
Frame |
steel plate welded/ Memorial arch body kind |
6 |
Frame thickness |
20mm |
seven |
Travel manner |
equipment |
8 |
Content of rollers |
GCr15MoV |
9 |
Content of shafts |
45# steel with tempering |
10 |
Diameter of shafts |
φ40mm |
eleven |
Number of rollers |
10-16 rollers |
twelve |
Main power |
3-8kw |
13 |
Servo Motor Power |
1.2KW |
Computerized Slicing Method:
Ceiling method Steel drywall T bar Tee Grid form mild keel roll forming machine
No : |
Chopping Method Main Parameter : |
|
one |
Content of blades |
Gcr12MoV quenched |
2 |
Cutting Sort |
Non-End large velocity cutting |
three |
Drived by |
Servo motor |
four |
Power offer |
hydraulic electricity |
5 |
Frame |
Pillar design with rack & pinion program |
6 |
Stroke swap |
non-speak to photoelectric swap |
7 |
Hydraulic motor Electrical power |
1.2 kw |
8 |
Hydraulic oil: |
46# |
Dimensions: 3500х800х1400mm
Weight : 3 tons
Voltage:380V/50HZ3Phase (as customer`s request)
Rollerfixer : Xihu (West Lake) Dis. column
Body:center plate welded, memorial arch frame variety
Frame thickness:25mm
Drive mode: gear box
Material rollers: GCr12MoV
Material of shafts: forty five# steel with tempering
Diameter of shafts: φ40mm
Amount of rollers : 16 rollers
Main energy: 3kw
Speed: 10-50m/min
Cyclical planetary gear velocity reducer)
Observe: various sizes will be created by modifying the spacers by hand.
The use of original gear manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our firm and the detailed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.