The Taper Attach Direct Thread Adaptor offers a Taper Adapter immediate thread interface for taper mounted suppressors. Two models of wrench flats make it equally easy to attach or take away from the suppressor or your firearm’s muzzle threads. No proprietary tools essential. Available in 1/2×28 and 5/8×24 with 18x1mm support just around the corner. While it is easy to have immediate thread suppressor capability that can move from host to host without the need for further muzzle units, it is necessary to remember that each host firearm must be examined for baffle alignment via visible inspection before firing.
The 1/2×28 Insert can be utilised with cartriges up to 30 caliber and the 5/8×24 can be utilized up to .338 caliber.
The use of direct thread adaptors improves on immediate thread mounted suppressors, by allowing the end user to have modular thread pitches. One Taper Mount Suppressor to Rule Them All.
Black Nitrided
1.5 Ounce Weight
Wrench Flats for each contingency
Taper Attach Repeatability and Stability
Multi-Thread versatility for your Taper Mount Suppressor
taper adapters allow the utilization of holders or tools with a different machine-side taper then your equipment spindle taper, such as utilizing a BT40 tapping chuck on a 50-taper spindle.
These adapters eradicate lead time losses in case of a machine breakdown. Adapters can also help in testing custom equipment on another machine than the planned production machine.
Taper adapters avoid the need for a supply of new holders or tools for a specific machine. They arrive prepared to use with built-in locked clamping mechanisms having a clamping screw on a ball bearing for steep taper clamping or HSK locking product for taper clamping.
The steep taper may be the standardised form of a tool taper for clamping tools in the main spindle of a machine tool
The steep taper is standardised in DIN 69871 part 1
No self-locking (in contrast with the Morse taper), thereby making tool changes easier without clamping. That is specifically significant for computerized tool changes
Little clamping travel equals short clamping time
High torsional rigidity due to the short distance between your cutting edge and spindle bearing (short overall length)
For adapting morse taper tools to milling equipment that take R8 tools
Alloy steel hardened to 50-52 rc
Critical surfaces precision ground
Use in R8 Machines
Turning Tools More taper reducing sleeve is employed to convert your headstock by #2 MT to #1 MT. That is useful should you have a drive centre or pen mandrel which is usually 1MT and your headstock is 2MT