All EPT shaft collars, including quick-clamping collars, are solitary point faced to make sure perpendicularity and proper alignment. This critical manufacturing stage assures exact shaft collar experience to bore relationship resulting in correct aspect positioning on the shaft and even pressure on interfaced elements.
Quick-clamping shaft Shaft Clamp collars from EPT are made from high quality aluminum with type-II sulfuric anodized finishes, with a dark-colored finish upon the collar and a gold finish about the clamping lever for added visibility. Aluminium collars are corrosion tolerant, lighter than various other metals, possess low inertia and also have non-magnetic properties. All EPT products will be RoHS and REACH compliant. Available normal sizes for the quick-clamping shaft collars happen to be 0.375” to 1 1.5” in the inches series and 8 mm to 38 mm in the metric series.
Shaft Collar, System of Measurement Inches, Shaft Locking Type – Couplings 1 Piece Quick Clamp, Bore Type – Collars Basic Bore, Bore Dia. 3/8 In., Materials – Collars Black Anodized 6061 Aluminum, Outside Dia. 1-1/2 In., Width .394 In., Clearance Dia. 1.496 In., Screw Size M3, Screw Material 18-8 300 Series STAINLESS, Operating Temp. Range -40 Degrees to 200 Degrees F, Specifications RoHS2 Compliant, REACH Compliant
The Shaft Collar 1×3/8, 1/2″ for Key Shaft is made from lightweight Aluminum, the two piece design enables you to install these collars anywhere on a shaft without removing components. In addition to reducing the overall weight, the flats allow you to rotate a shaft without marring or gouging the shaft. Merely place the collar on the shaft and tighten the two socket-brain cap screws to protected the collar and a wrench and be positioned on the collar’s flats to rotate the entire shaft/collar assembly.
Manufactured from lightweight Aluminum
Enables you to install these collars anywhere on a shaft without removing components
Easily place the collar about the shaft and tighten the two socket-head cap screws to secure the collar
Flats enable you to rotate a shaft without marring
Climax Part C-056-S Placed Screw Collar is made with T303 Stainless Steel, which works well in corrosive environments. Measurements will be 9/16 in. Bore, 1 in. OD, 7/16 in. Width. It is effective on hard and delicate shafts. It is a Affordable collar design, and Easily installed where main disassembly would otherwise be required.
EPT quick clamping shaft collars collar clamp hinge buy manufacturing 2 1 8 in steel,shaft collar clamp drive manufacturing steel vex clamping design,vex clamping shaft collar collars 1 part with lever clamp hinge,vex clamping shaft collar clamp 3d model developing quick 1 3 8 in alum,EPT quick clamping shaft collars collar clamp 2pc 1 in steel stainless split with lever,climax steel s shaft collar two piece clamp style EPT speedy clamping collars 2pc 1 in steel pressure,clamp about shaft collars couplings universal clamping collar design and style with mounting holes 2pc 1 in metal,shaft collar clamp force clamping calculation quick connect collars at best price in,clamp shaft collar clamping collars drive calculation quick connect,stainless steel dual split shaft collar with speedy clamping clamp hinge pressure calculation.
Black Oxide Plated Steel One-Piece Clamping Collar.
Recessed Screw Head has an outside surface free from key projections for safety.
Design totally engages the shaft without marring.
Greater axial holding electricity than placed screw collars.
Effective on hard & gentle shafts.
Indefinitely adjustable and easy to remove, one-piece clamping collars are typically used on hard or smooth standard round shafts, over a split hub or 
about thin wall tube. Through the use of friction to supply superior grip on pubs and shafts, single split collars provide sturdier, more dependable results in comparison with the set screw style of solid collars. In addition they offer tremendous axial vitality, while reducing shaft distortion for remarkable performance and decreased deterioration.
The collar clamping mechanism works fast and proficiently with simple hands opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the external surface area of the collar. The design of the cam on the lever and the mating machined surface on the collar assure a good fit with a maximum axial load of 35 to 120 lbs / 133 to 489 N depending on the collar bore size. In conditions where higher holding power is definitely or clamp axial load is required, the quick-clamping collar is not the recommended decision. EPT offers a finish line of industry-leading one-piece and two-part shaft collars suitable for these applications.