helical worm gear motor
Helical-worm gearmotors
Due to their design and from being coupled with a helical gear stage, the helical-worm gearmotors S..DR.. have especially high efficiency. They are also extremely low-noise and therefore avoid high noise emission levels.
Low-noise continuous operation: gear unit combination optimized with respect to efficiency
Do you anticipate a drive remedy to impress you using its high level of overall performance and efficiency? If so, we’d recommend our high-quality helical-worm gearmotors EP for you. These could be implemented individually in the modular system. In this manner, they offer you a massive range of sizes, equipment ratios and motor sizes.
However, their greatest strength can be their running smoothness and their incredibly low noise development. One thing is for certain – With the helical-worm gearmotors EP you opting for a robust drive solution that you will hardly actually hear.
The overall concept offers you a lot more practical product characteristics and benefits. Included in these are the significantly higher effectiveness of the helical-worm combinations as opposed to single helical-worm gear models. This is how you save extra energy in the operation of your systems and are able to noticeably reduce ongoing operating costs.
You will have the low-noise helical-worm gearmotors EP. – to fit your individual requirements – with a wide selection of AC motors. In addition, you can freely configure all of the relevant properties. In this manner, you can effectively make use of all the benefits offered by this mixture of low-noise helical-worm gear unit and performance-optimized engine. Even greater variance may be accomplished because of the optional flange or foot-mounted design and by selecting between solid and hollow shaft.
Save time and money
By opting for one of our gearmotors, you already are saving money and time with this selection and project planning. It is because our modular system allows a multitude of mixture options for gear units and motors. You can consequently reduce operating costs, depend on a long service life and reap the benefits of simplified maintenance that is feature of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than one helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
AC motors
Combine the helical-worm equipment unit with this AC motors:
Characteristics
Quiet and dependable transmission of torque
High overload capacity
Hardened steel worm gear and bronze alloy worm wheel provide exceptional toughness and lengthy service life.
Optional durable bearings deliver high radial and axial load capacity
High strength cast iron housing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminium alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Available in footed, shaft install or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear units are helical/helical-worm combinations, so they are better than normal helical-worm equipment units. Due to their outstanding efficiency, these drives can be used in every commercial sector and customized to person torque and acceleration requirements. The decrease ratios afforded by the helical-worm gear stage and the reduced noise levels during procedure make these gearmotors ideal low-cost solutions for basic applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Due to the unique combination of optimized worm wheel materials with unique lubricants, optimized form, this powerful engine achieves high degrees of effectiveness and torque. The housing machined on all sides enables diverse mounting options. Dual chamber shaft seals are utilized as standard.
The reduced contour design helps it be ideal for implementing applications e.g. in the meals industry. The housing has no recesses, which simplifies cleaning – an especially important feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm, foot
Class 12 Helical and hardened and floor worm gears: Provides higher efficiencies and better torque capacity in smaller sizes.
Multiple Input Options: Essential gear motors, in . or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Choices: Hollow bores and shrink disks for shaft installation, inch and metric result shafts, installation pilots and flanges provide a wide selection of design solutions.
UNIBLOCK Housing: For optimum rigidity universal mounting on five sides or with a torque arm.
Sealed for Washdown: Keeps contaminants and water out.
Worldwide Motor: Multiple leads and windings for worldwide multi volt/Hz requirements in addition modular design to simply accept brakes, encoders or forced cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right position worm geared motors arranged new standards for reliability, effectiveness and economic climate with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly style provides for easy integration now and a really future proof alternative. The EP gear electric motor offers total versatility in mounting choices includes shaft, base, encounter, and flange solutions. The electric motor terminal box can be mounted in choice positions rotated in 90º steps around the engine frame offering for unparalleled integration opportunities.
EP gear motors adhere to UNITED STATES and International requirements, including NEMA, IEC, CSA, and CE, the EP series permits worldwide acceptance, a true total solution for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the EP series is usually dust tight and hose evidence,and can be used outdoors or in wet and dusty conditions without the use of additional enclosures. Complete rated output is available at the output shaft of the unit.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connection Regular with CAGE CLAMP®
Additional features:
Connecting with Connect connectors.
With integrated inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
Due to the unique combination of optimized worm wheel materials with particular lubricants and optimized shape, this powerful geared engine achieves high degrees of performance and torque. The reduced contour design makes it suitable for implementing applications electronic.g. in the meals industry. The housing does not have any recesses, which simplifies cleaning – an especially essential feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a wide selection of compact, heavy duty helical gear drives with long life performance features and simplified maintenance. The usage of condition of the art helical and worm gear combinations affords optimum performance fulfilling a wide variety of ratio requirements. The 800 BR is usually functionally interchangeable with most major manufacturer’s drives.
SPECIFICATIONS
Double and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All systems shipped pre-lubed for your particular installation position with KluberSYNTH UH1 6-460
Obtainable in NEMA C-face flanged and immediate input
Projecting and hollow output shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white (BK) and stainless epoxy finish (SBK)
Available in hollow or projecting output shafts
Dual and triple reduction ratios
Flanged or foot mounted
All systems adaptable to flooring, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient compact right-angle geared motor. A favorably priced alternative for the standard jobs expected of a right-angle drive.
5 gear sizes (S0 to S4).
Engine power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from i = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors available with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear unit and AC electric motor are directly flange mounted, the pinion is on the electric motor shaft. This integrated small design is an essential aspect for the high accuracy and the incredible stiffness of EP geared motors.
For vector-controlled inverter operation utilization of an incremental encoder is provided for as standard.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The degree of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are manufactured from case hardened alloy metal and the flanks are precision ground. The worm tires are made from unique wear-resistant bronze. Helical worm gears include a helical equipment. Worm gears with shrink disc, torque limiter, as well as adjustable backlash designs are also component of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Overall efficiency gearboxes in universal design. The housings are produced from top quality cast iron. The rugget wall space and inner ribbing ensure incredibly torsional stiff and sound dampening housings. The exterior ripping offers a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent operation under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with durable walls and internal ribbing
Intense torsional resistance and low noise
Case hardened worm shafts and worms with precision floor flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes equipped with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange mounting or universal design
Output shaft available since solid shaft or hollow shaft
Shrink disc, torque limiter,as well as adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG
