This technology uses different types of gears for power transmission. In fact, it can transmit power not merely between parallel shafts, but also between non-parallel, co-planar, and intersecting etc. shafts.
Norpak is a respected supplier of top conveyor systems. As a practiced and highly experienced producer of chain conveyors, we provide a diversity of advanced products for use in different areas. Our catalogue is rich with product options, providers and accessories open to our clientele.
In the world of mechanical power transmission, gear drives employ a special and prominent place. This is actually the the majority of preferred technology if you want to transmit considerable power over a brief distance with a continuous velocity ratio. The mechanism of gear drives is fairly simple – the teeth, which are cut on the blanks of the gear wheel, mesh with one another to transmit power. To avoid slipping, the projections using one disc mesh with the recesses on additional disc in gear drives.
Once the products you need to transport are safely loaded on the chain conveyor, the system is powered through the manipulation of the ON/OFF switch or change. This causes a clockwise or counter-clockwise rotational motion on the motor system, depending on the required direction of motion. This prospects to a motion of the networked gears and chain to move in the same path as the motor. As a result, the chain conveyor techniques the load through the drive train to the last gear, where off-loading is performed. For unidirectional operations, conveyor systems may also be tailor-made to offer movements to either path. This is attained through 
integrating several motors on either end of the conveyor program.
For optimal efficiency, the conveyor should be placed in a horizontal position. This creates a simple and steady condition for handling of products. However, the conveyors may also be used wherever angular procedures are needed, as the gears can be adjusted and set at different angles.
See our site to find out about our methods behind gear chain.