Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, taken off unused 18” or 24” China Air Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring in the middle of your electric motor, capacitor and quickness control switch is still hooked up nevertheless the cord itself is normally detached as observed in the photos. (Find “Control Notice” below for alter type.)
T (See “App Notice” below for make use of in various other applications.)
electric fan motor china Dimensions: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” lengthy with a collection screw simple. There are (4) threaded mounting lugs on leading of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electrical motor) is Clockwise.
Control Take note: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). Both of these types of switches both control the engine in the same way (but you possess a rotating knob and you have got a pull-chain). In the event that you order several motor at the same time, we can do our better to supply your order with each one sort of control or the additional.
Application Note: USUALLY DO NOT use this electric electric motor in a nonfan software. This is a completely enclosed fan electric engine and designed to have constant ventilation over the electric motor casing for cooling. The casing isn’t vented and the electric powered motor will overheat and enter automatic thermal overload if operate in a nonfan program where there isn’t strong ventilation past the engine. (Caution Note: the electrical motor will restart immediately when it cools cool off.) Using this electric motor for applications apart from 18 & 24″ TPI fans may 
possibly also overload the electric motor and lead it to proceed into automatic thermal overload. (Your companion blade from another producer may possess a steeper blade position.)
Origin: This electric engine is manufactured in China.