Worm Gear Rate Reducers: Double Reduction
Ever-Power. manufacturers double decrease Worm Gear reducers that are designed to last. Double decrease units are created with the same high quality parts as the single decrease Worm Gear reducers.
Double Decrease Worm Gear Swiftness Reducer Features
Cost effective
High Reduction: 75:1 – 3600:1 and higher
C-face input or sturdy shaft input
Combination of two single reduction reducers
Solid or hollow outcome shafts available
Several varieties of bolt-on bases available
Substantial tensile strength cast bronze worm wheel and a hardened and floor alloy steel worm made integral with the shaft for prolonged and trouble-free life
All cast iron construction
9 Models: I, IC, IS, ICS, IM, IMS, ISF, ICSF, IMSF
Double Lowering Worm Gear Rate Reducer Applications
Conveyors
Packaging Machinery
Cranes/ Hoists/Winches
Mixers/ Agitators
Shipping & Delivery
JIT delivery
Standard shipping: 3-4 days
Same/next day shipping on stock items at no additional
cost
Double reduction gearing mechanism is utilized in huge machinery and automotives where in the speed needs to be decreased at a essential level. For eg if the insight speed is usually 2000rpm and the output acceleration desired is definitely 300rpm a reduction gearing system is used such as a reduction gear container. However in case of twice reduction mechanism, the reduced amount of speed takes place in 2 steps. At first 
the type from the engine shaft has a pinion mounted on it through couplings. This pinion equipment is then linked to an intermediate gear which is first decrease gear. This gear is then connected to another low swiftness pinion on another shaft. This low quickness pinion is connected to the next reduction gear which is installed on the propeller shaft which is the output.
Greaves Double Reduction Rate Reducers are two level worm reduction devices. A specifically designed primary worm reduction unit is integrally installed on a typical single lowering Greaves worm reducer which varieties the next stage. The composite units provide the most small and rigid arrangement for large reduction of speed necessary for slower going machinery. A broad range of ratios upto 4900:1 is available.
The wormshafts are made of top quality case hardening steeL accurately generated, ground and superfinished. The wormwheels comprise of phosphor bronze centrifugally cast rims of substantive sections welded to rigid centres. Considerable flexibility of shaft layout is certainly permissible with all sorts of Double Reduction units
Ever-Power Double Reduction Worm Gearboxes will be two stage worm reduction units.
A exclusively designed primary worm lowering product is integrally mounted about a standard single lowering AGNEE worm double reduction gear reducer gearbox which forms the second stage. The composite models provide the most compact and rigid arrangement for large reduced amount of speed necessary for sluggish shifting machinery. A wide selection of ratios up to 4900:1 is offered.
Double Decrease Worm Gear Box Sizes Available around are 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430.
Nominal Gear Ratios: 100:1, 150:1, 200:1,300:1, 400:1, 600:1, 750:1, 1000:1, 1200:1, 2000:1, 2800:1
Nominal ratios listed are a typical collection of commonly employed ratios from the entire range of Ever-Power Twice Reduction Worm Gear Box. Information on other ratios on request.
Under Driven / Over Driven / Vertical Input or Output Shaft Release / Shaft Mounted Version / All types with motor installation adaptor /
motor – optional
The worm shafts are created from high quality case hardening steel, accurately generated, ground and super finished. The worm wheels include phosphor bronze centrifugally cast rims of substantial sections welded to rigid centers. Considerable versatility of shaft layout is certainly permissible with all types of Double Reduction products.
Product Description
The products are widely applied in the generating equipments of a myriad of industries household and overseas. They will be the best selections for nowadays modern conveniences of mechanical reducing travel control to understand large twisting distance, significant gear ratio, low noise, high effectiveness and low temperature.
Description:
Customized high quality double worm gear rate reducer aluminium gearbox decrease gearbox with electric motor
Ratio:
7.5,10,15,20,30,40,50,60
Color:
Blue, Silver Or seeing that customer’s requirements
Noise:
low noise (<50DB)
Advantage:
Large Efficience and low noise and low temperature
Material:
Housing: Die-Cast Aluminum Alloy
Worm Gear-Bronze 9-4#
Worm-20CrMnTi with carburizing and quenching, surface harness is 56-62HRC
Shaft-chromium steel-45#
Packing:
Carton and Wooden Case
Bearing:
C&U Bearing
Seal:
NAK SKF
Warranty:
One Year
Input Power:
0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw
Usages:
Industrial Machine: Food Stuff, Ceramics, Chemical substance, Packing, Dyeing,
Wood working, Glass.
IEC Flange:
56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant:
Synthetic & Mineral
